Overview

TITAN 938H

Compare and Save:
  - 2.75 yd3 Bucket Capacity
  - 158hp Cummins QSB6.7 EPA Tier III Engine (Made in the U.S.A)
  - ZF Powershift Transmission
  - Eaton USA Hydraulic Pump
  - Husco International Hydraulic Valve
  - Spacious Air Conditioned Cab
  - 20.5 X 25 Tires
  - Ride Control
  - Single Lever Hydraulic Pilot Controls
  - 1 Year or 1500 Hour Warranty
  - Optional Hydraulic Quick Coupler
  - Optional Auto Greasing System
  $82,000


Specifications


Engine:    
Make/Model Cummins QSB6.7 (Made in U.S.A)  
Type 4-Stroke Inline Diesel, Turbocharged  
Rated power 158 hp  
Peak torque 540  lb-f  
Displacement 6.7L  
Cylinder-BorexStock 6-105×120mm  
Aspiration Turbocharged, charge air cooled  
     
Transmission:    
Make/Model ZF 4WG -158  
Type Power shift, Hydro-Electric Control w/ Kickdown  
Converter Single-stage, Single-phase, three elements torque converter  
Travel Speeds (mph)  
Forward
Reverse
  
 
Gear 1
3.5
3.7
  
 
Gear 2
6.6
6.9
  
 
Gear 3
13
13.85
  
 
Gear 4
23
    
     
Hydraulic System:    
Relief valve setting
2755 psi
  

Hydraulic cycle times

    
Raise - (full) 4.96s  
Dump 3.27s  
Lower - (empty) 1.55s  
Total 9.78s  
     
Brakes/Steering/Tires:    
Steering Load sensing full hydraulic steering  
Axles Wet brakes  
Service brakes Full hydraulic service braking and full enclosed wet brakes
Parking brakes Spring applied and hydraulic release caliper-brake
Tires 20.5 x 25 - 20PR(TL)  
     
Capacities:    
Fuel tank 47.5 gal  
Hydraulic tank 26.4 gal  
Crankcase 4 gal  
Transmission 5.8 gal  
Axle Oil (Front & Rear) 6.86 gal  
     
Operating Weight 27,557 lb.  
Rated Bucket Capacity 2.75 y3  
Rated Load 8,377.56 lb.  
Maximum traction 24,728.98 lbf  
Grade Ability 260  
Breakout Force 26977.07 lbf  
Static tipping load 17636.98 lb.  
     

Dimensions

A: Overall Height 130 in L: Maximum rollback at ground 41.2º
B: Overall Length 288.58 in M: Maximum rollback at carry position 47º
C: Wheelbase 114.17 in N: Hinge pin height at carry position 19.68
D: Ground Clearance 12.24 in O: Digging depth 3.38 in
E: Center line of rear axle to hitch 57.08 in P: Overall width 105.19 in
F: Maximum lift height 194.76 in Q:Tread width 76.77 in
G: Hinge pin height at full lift 150 in R: Width over tires 97.24 in
H: Maximum dump height 116.10 in S: Turning radius outside bucket 234.94 in
I: Bucket dump at full height 45º T:Turning radius outside tires 230.9 in
J: Maximum rollback at full height 58.1º U: Turning radius 220.66 in
K: Dump Reach 38 in V: Maximum Steering angle 35º