Overview

TITAN 958H

Compare and Save:
  - 4 yd3 Bucket Capacity
  - 220hp Cummins QSB6.7 EPA Tier III Engine (Made in the U.S.A)
  - ZF Powershift Transmission
  - Parker Hydraulic Pump
  - Husco International Hydraulic Valve
  - Spacious Air Conditioned Cab
  - 23.5 X 25 Tires
  - Ride Control
  - Single Lever Hydraulic Pilot Controls
  - 1 Year or 1500 Hour Warranty
  - Optional Hydraulic Quick Coupler
  - Optional Auto Greasing System
  $130,000


Specifications


Engine:    
Make/Model Cummins QSB6.7 (Made in U.S.A)  
Type 4-Stroke Inline Diesel, Turbocharged  
Rated power 220 hp  
Peak torque 700  lb-f  
Displacement 6.7L  
Cylinder-BorexStock 6-105×120mm  
Aspiration Turbocharged, charge air cooled  
     
Transmission:    
Make/Model ZF 4WG -200  
Type Power shift, Hydro-Electric Control w/ Kickdown  
Converter Single-stage, Single-phase, three elements torque converter  
Travel Speeds (mph)  
Forward
Reverse
  
 
Gear 1
3.6
3.6
  
 
Gear 2
6.6
6.6
  
 
Gear 3
14
14
  
 
Gear 4
23
    
     
Hydraulic System:    
Relief valve setting
2755 psi
  

Hydraulic cycle times

    
Raise - (full) 6.5s  
Dump 3.7s  
Lower - (empty) 1.6s  
Total 11.8s  
     
Brakes/Steering/Tires:    
Steering Load sensing full hydraulic steering  
Axles Wet brakes  
Service brakes Full hydraulic service braking and full enclosed wet brakes
Parking brakes Spring applied and hydraulic release caliper-brake
Tires 23.5 x 25
 
     
Capacities:    
Fuel tank 63.4 gal  
Hydraulic tank 29.05 gal  
Crankcase
 
Transmission 11.88 gal  
Axle Oil (Front & Rear) 10.56 gal  
     
Operating Weight 39,683 lb.  
Rated Bucket Capacity 4 y3  
Rated Load 11,023 lb.  
Maximum traction 37,093 lbf  
Grade Ability 300  
Breakout Force 40,465 lbf  
Static tipping load 22,046 lb.  
     

Dimensions

A: Overall Height 140 in L: Maximum rollback at ground 40.4º
B: Overall Length 322 in M: Maximum rollback at carry position 47.5º
C: Wheelbase 132 in N: Hinge pin height at carry position 21.65 in
D: Ground Clearance 17.32 in O: Digging depth 1.57 in
E: Center line of rear axle to hitch 66.53 in P: Overall width 118 in
F: Maximum lift height 218 in Q:Tread width 84.64 in
G: Hinge pin height at full lift 165.35 in R: Width over tires 108 in
H: Maximum dump height 123.3 in S: Turning radius outside bucket 289 in
I: Bucket dump at full height 45º T:Turning radius outside tires 264 in
J: Maximum rollback at full height 56.5º U: Turning radius 252 in
K: Dump Reach 41.73 in V: Maximum Steering angle 35º